Getting Started - Moasure ONE

Follow these tips to get the best experience from your Moasure device

Tip 1 - Turning On Moasure

Place the device in your hand and double-tap the front of the Moasure device gently to turn it on.

Moasure ONE will automatically switch off after a 30 second period of inactivity.

Note: Don't place it on solid surface when trying to double tap

Tip 2 - Reference Point

The reference point for measuring is the sharp corner of the device. On the opposite side to the LED.

This will give you maximum flexibility and control when measuring.

Moasure ONE - Measuring Reference Point

Tip 3 - Placing Moasure

When placing on the ground, be sure to let go of the device to ensure the device is completely stationary, especially on soft surfaces.

 

Tip 4 - Place it Gently

Place the module against a surface gently; aim to not hear the module landing against the surface.

Use your finger tips as shock absorbers to help you achieve this

Remember: Place it down without a sound.

Tip 5 - Moving Moasure

Move quickly, not slowly - try to maintain a pace of 3 ft (1 meter) per second.

Avoid unnecessary rotations when moving through the air.

Move around obstacles
you do not need to move exactly along the path you are measuring.

Tip 6 - Pausing

Pause every 6-8 seconds to maintain consistently high accuracy.

With motion-measuring, the measurement errors grows exponentially with time, so split a measurement that would take more than 8 seconds into 2 or more steps.

Pause as long as you like.
Once you have paused, take your time and plan your next step.

How to Get Support with your Measurements

STEP 1

Select the "?" button in the top left corner after a measurement you are not happy with



STEP 2

Choose "Email Support".





STEP 3

Your last measurement data files will be attached to an email, just add the specifics of the issue you are facing and we'll review your data and get back to you.